Week #5 Update - Last Week

I spent a lot time help the team to assemble the full scale track. It was pretty tiring but fun to work with wood. Since Dustin was sick, the work load split between Guojun and myself. Jack was a great help to me and my team. We worked really hard to complete the track.

Comments

Post a Comment

Popular posts from this blog

Week#4 Progress

In week 4, we built the subassemblies such as track supports, curved track, and column supports using wood. I was able to help the team to build the split portion of the track as well. In week four, we made a lot of progress towards finishing the full-scale track. However, I had problems fabricating the guide rail out of mild steel. I used 90-degree angle mild steel angle iron to make the guide rail. I was able to kerf the angle iron using a chop saw following Dan's directions. With the help of Dr. Furman, I used the acetylene torch to bend the angle iron.  Unfortunately, I wasn't able to bend the angle iron to the proper radius because the shop didn't have the resources to do the task. Roller bending machine requires to bend the angle iron correctly. Fortunately, the same day I failed to make the guide rail our of mild steel, my team and I were able to come up with another solution to make the guide rail. Eric and I went to the Home Depot to buy 2 x 2 x 8 wood 3 pieces
Read more

Week 3 progress

During week 3, after our design presentations, my team and I were able to fabricate column supports for the track. Also, I help my team cutting plywood mold to make the curve track. The idea was to kerf the wooden track, add wooden clue to the slits, clamped on to the arc-shaped mold, and leave it overnight to dry. Since I am planning to fabricate the guide rail, I emailed Dan about kerf specifications for the angle iron. I am planning to use 3/16'' thickness 2'' x 2''x 6 ft 3 pieces and 2'' x 2'' x 3 ft 1 piece of angle iron to fabricate the guide rail.  Dan emailed me back saying that each slit has to be 4-6'' apart and depth of each slit has to be about 3/4'', and also to use an acetylene torch to help the angle iron to bend. I am planning to get the guide rail done the beginning of next week. On Thursday, I helped Eric to buy wood and fasteners from Home Depot.  We bought all the wood stock we needed to build our full-scal
Read more

Orientation Day #2

This orientation day was helpful for many students who did not have SolidWorks Skills. Since I was very familiar with SolidWorks, but Paul showed us some shortcuts and faster ways of finishing the lego part. After I finished modeling the lego part, I saved it as an .STL file and insertED into CURA. However, I ran into a problem when I tried to 3-D print the part. Every time, I inserted model and properly oriented in CURA, it disappeared the model from the layout. My teammate Dustin explained to me the procedure on how to 3-D print the lego part, but I couldn't resolve the problem. Next, we learned how to use the Tig welder. It was pretty straightforward that I learned pretty fast. I also discussed the lightning talk and potential design concepts for the curved portion of the track with my teammates.
Read more